| GTZ Series | Print This Page |
|---|
| TURRET | GTZ-2000 | GTZ-2600 |
|---|---|---|
| Stations | 12 + 12 [ 16 + 16 ( Opt. ) ] | |
| Indexing drive | FANUC AC Servo motor | |
| Indexing speed | 0.2 sec. Adjacnt / 0.5 sec. 180˚ degree ( Single step ) | |
| Accuracy | Positioning : ± 0.00069° Repeatability : ± 0.00027° | |
| OD tool shank size | □ 25 mm [ □ 20 mm ( Opt. ) ] ( □ 1" [ □ 0.8" ( Opt. ) ] ) | |
| ID tool shank size | Ø 40 mm [ Ø 32 mm ( Opt. ) ] ( Ø 1.6" [ Ø 1.2" ( Opt. ) ] ) | |
| LIVE TOOLING TURRET ( OPT. ) |
GTZ-2000 | GTZ-2600 |
| Stations / Live tooling stations | 12 + 12 [ 16 + 16 ( Opt. ) ] | |
| Indexing drive | FANUC AC Servo motor | |
| Indexing speed | 0.2 sec. Adjacnt / 0.5 sec. 180˚ degree ( Single step ) | |
| Accuracy | Positioning : ± 0.00069° Repeatability : ± 0.00027° | |
| Live tooling drive motor | AC 3.7 / 5.5 kW ( 4.9 / 7.4 HP ) | |
| Live tooling shank size | ER32 ( Ø 20 mm ) [ ER25 ( Ø 16 mm ) Opt. ] ( ER32 ( Ø 0.8" ) [ ER25 ( Ø 0.6" ) Opt. ] ) | |
| Live tooling RPM range | 6,000 rpm | |
Specifications are subject to change without notice.
Top