Machine Specifications
| GS-2000 / 3000 series |
|---|
| SUB-SPINDLE ( OPT. ) | GS-3300 / L | GS-3600 / L | |
|---|---|---|---|
| Chuck size | Ø 8" | ||
| Hole through spindle | Ø 55 mm ( Ø 2.16" ) | ||
| Spindle bearing diameter | Ø 100 mm ( Ø 3.93" ) | ||
| Spindle nose | A2-6 | ||
| Motor output ( cont. / 15 min. ) | 18.5 / 22 kW ( 25 / 30 HP ) | ||
| Spindle drive system | Built-in motor | ||
| Spindle speed range | 5,000 rpm | ||
| Spindle torque ( cont. / 15 min. ) | 35 / 42 Nm ( 26 / 30 HP ) | ||
| Zs-axis travel | 680 / 1,430 mm ( 26.77" / 56.29" ) | ||
| Zs-axis rapid | 30 m/min. ( 1,180 IPM ) | ||
| Slide way type | Linear guide way | ||
| Zs-axis servo motor | 3 kW ( 4 HP ) | ||
| Zs-axis ball screw Ø [ pitch ] | Ø 36 mm [ 10 mm ] ( Ø 1.41" [ 0.39" ] ) / Ø 40 mm [ 12 mm ] ( Ø 1.57" [ 0.47" ] ) | ||
| Zs-axis thrust ( cont. ) | 769 / 640 Kgf ( 1,695 / 1,410 lbf ) | ||
Top
Specifications are subject to change without notice.