Machine Specifications
| GS-2000 / 3000 series |
|---|
| SUB-SPINDLE ( OPT. ) | GS-2000 / L | GS-2600 / L | GS-2800 / L |
|---|---|---|---|
| Chuck size | Ø 6" | ||
| Hole through spindle | Ø 46 mm ( Ø 1.81" ) | ||
| Spindle bearing diameter | Ø 80 mm ( Ø 3.14" ) | ||
| Spindle nose | A2-5 | ||
| Motor output ( cont. / 30 min. ) | 5.5 / 7.5 kW ( 7.4 / 10 HP ) | ||
| Spindle drive system | Built-in motor | ||
| Spindle speed range | 6,000 rpm | ||
| Spindle torque ( cont. / 30 min. ) | 35 / 48 Nm ( 26 / 35 ft-lb ) | ||
| Zs-axis travel | 750 / 1,500 mm ( 29.52" / 59.05" ) | ||
| Zs-axis rapid | 30 m/min. ( 1,180 IPM ) | ||
| Slide way type | Linear guide way | ||
| Zs-axis servo motor | 3 kW ( 4 HP ) | ||
| Zs-axis ball screw Ø [ pitch ] | Ø 36 mm [ 10 mm ] ( Ø 1.41" [ 0.39" ] ) / Ø 40 mm [ 12 mm ] ( Ø 1.57" [ 0.47" ] ) | ||
| Zs-axis thrust ( cont. ) | 769 / 640 Kgf ( 1,695 / 1,410 lb ) | ||
Top
Specifications are subject to change without notice.