| X & Z AXES | GS-200/200L | GS-260/260L | GS-280/280L |
|---|---|---|---|
| Max. X-axis travel*1 | +10 mm, - 200 mm, - 30 mm ( 0.39", - 7.87" , -1.18" ) | ||
| Max. Z-axis travel*1 | + 30 mm, - 570 mm ( + 1.18" , - 22.44" ) | ||
| X / Z axes rapids | 20 m/min. ( 788 IPM ) , 24 m/min. ( 945 lPM ) | ||
| Slide way type | Hardened & Ground Box Ways | ||
| Feed rates | 1~ 4,800 mm/min. ( 1~189 IPM ) | ||
| X-axis servo motor | AC 1.6 kW ( 2.2 HP, FANUC α12 / 4,000is, Absolute encoder, 1,000,000/rev. ) | ||
| Z-axis servo motor | AC 3.0 kW ( 4.1 HP, FANUC α12 / 3,000i , Absolute encoder, 1,000,000/rev. ) | ||
| X-axis ball screw Ø / pitch | Ø 32 mm ( 1.26" ) / Pitch 6 | ||
| Z-axis ball screw Ø / pitch | Ø 36 mm ( 1.41" ) / Pitch 10 | ||
| X / Z axes thrust ( cont. ) | 961.8 Kgf ( 2,117 lb ) / 769.4 Kgf ( 1,692 lb ) | ||
Specifications are subject to change without notice. *1 Individual models may vary, please see interference drawings. *2 Work piece supported by chuck & tailstock. *3 Chucks optional. *4 Optional 10" Big-bore hydraulic cylinder & chuck provide Ø 78 mm ( 3.07" ) bar capacity.
Top