| SUB-SPINDLE ( Opt. )*1 |
GLS-1500 / L |
GLS-2000 / L |
| Hole through spindle |
Ø 1.65" ( Ø 42 mm ) |
| Bar capacity |
Ø 1.22" ( Ø 31 mm ) |
| Spindle bearing diameter |
Ø 3" ( Ø 75 mm ) |
| Spindle nose |
Ø 4.33" ( Ø 110 mm ) |
| Motor ( cont. / 5 min. ) |
5 HP / 7.5 HP ( 3.7 kW / 5.5 kW ) |
| Spindle drive system |
Built-in motor |
| Spindle drive ratio |
1 : 1 |
| Spindle speed range |
6,000 rpm |
| Spindle full output speed |
1,750 RPM ( 5 min. ) / 2,300 RPM ( cont. ) |
| Spindle torque ( cont. / 5 min. ) |
11 / 22 lb-ft ( 15 / 30 N-m ) |
| Z2-axis travel |
24.8" ( 630 mm ) |
| Z2-axis rapid |
1,181 IPM ( 30 m/min. ) |
| Slide way type |
Linear guide way |
| Z2-axis ball screw Ø / pitch |
Ø 1.42" ( Ø 32 mm ) / Picth 10 |
| Z2-axis thrust ( cont. ) |
987 lbf ( 448 kgf ) |
HOME
HORIZONTAL TURNING
GLS-1500 series
Detail Info
Specifications
Distributor Network
Contact / Inquiry
Parts Online 24/7
Top