LP-21YZF series Bridge Type 5-Face Machining Center :
| Prinit this page | LP-3021YZF | LP-4021YZF | LP-5021YZF | LP-6021YZF |
|---|---|---|---|---|
| CAPACITY | ||||
| X-axis travel | 3,000 mm ( 118.1" ) | 4,000 mm ( 157.4" ) | 5,000 mm ( 196.8" ) | 6,000 mm ( 236.2" ) |
| Y-axis travel | 2,800 mm ( 110.2" ) | |||
| Z-axis travel | 1,000 mm ( 39.3" ) | |||
| Dist. form spindle nose to table top | 200 ~ 1,200 mm ( 7.8" ~ 47.2" ) | |||
| Dist. between columns | 2,300 mm ( 90.5" ) | |||
| WORKING TABLE | ||||
| Table size ( X direction ) | 3,020 mm ( 118.9" ) | 4,020 mm ( 158.2" ) | 5,020 mm ( 197.6" ) | 6,020 mm ( 237.1" ) |
| Table size ( Y direction ) | 2,010 mm ( 79.1" ) | |||
| Table load capacity | 10,000 kg ( 22,000 lb ) |
12,000 kg ( 26,400 lb ) |
15,000 kg ( 33,000 lb ) |
18,000 kg ( 39,600 lb ) |
| SPINDLE | ||||
| Spindle motor ( cont. / 30min. ) | 22 / 26 kW ( 30 / 35 HP ) | |||
| Spindle speed | 4,000 rpm ( Std. ) 6,000 / 8,000 rpm Build-in Spindle ( Opt. ) 8,000 / 10,000 rpm Direct-driven Spindle ( Opt. ) |
|||
| Spindle taper | CAT50 | |||
| FEEDRATE | ||||
| X-axis rapid feedrate | 20 m/min. ( 788 IPM ) |
15 m/min. ( 590 IPM ) |
10 m/min. ( 394 IPM ) |
10 m/min. ( 394 IPM ) |
| Y-axis rapid feedrate | 15 m/min. ( 590 IPM ) | |||
| Z-axis rapid feedrate | 15 m/min. ( 590 IPM ) | |||
| Cutting feedrate | 10 m/min. ( 394 IPM ) |
5 m/min. ( 197 IPM ) |
||
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 32 ( 60 / 90 / 120 Opt. ) | |||
| Max. tool diameter / adj. pocket empty | Ø 127 / Ø 215 mm ( Ø 5.00" / Ø 8.46" ) | |||
| Max. tool length ( from gauge line ) | 350 mm ( 13.7" ) | |||
| Max. tool weight | 20 kg ( 44 lb ) | |||
| ACCURACY | ||||
| Positioning accuracy ( JIS B 6338 ) / Full Travel | P ≤ ± 0.015 mm ( ± 0.00059" ) | |||
| Positioning accuracy ( VDI 3441 ) / Full Travel | P ≤ 0.025 mm ( P ≤ 0.00098" ) |
P ≤ 0.030 mm ( P ≤ 0.00118" ) |
P ≤ 0.040 mm ( P ≤ 0.00157" ) |
P ≤ 0.050 mm ( P ≤ 0.00197" ) |
| Repeatability ( JIS B 6338 ) / Full Travel | ± 0.003 mm ( ± 0.000118" ) | |||
| Repeatability ( VDI 3441 ) / Full Travel | Ps ≤ 0.020 mm ( Ps ≤ 0.00078" ) |
Ps ≤ 0.025 mm ( Ps ≤ 0.00098" ) |
Ps ≤ 0.030 mm ( Ps ≤ 0.00118" ) |
Ps ≤ 0.035 mm ( Ps ≤ 0.00137" ) |
| GENERAL | ||||
| Power requirement | 220 ± 10 % | |||
| Pneumatic pressure requirement ( min. ) | 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI ) | |||
| Hydraulic unit tank capacity ( pump ) | 120 liter ( 31.5 gal ), 10 HP | |||
| Lubrication oil tank capacity | 6 liter ( 1.6 gal ) | |||
| Coolant tank capacity ( pump ) | 750 liter ( 198 gal ), 1.5 HP | |||
| Machine weight | 33,000 kg ( 72,600 lb ) |
38,000 kg ( 83,800 lb ) |
41,000 kg ( 90,200 lb ) |
45,000 kg ( 99,000 lb ) |
Specifications are subject to change without notice.
Top