| GTZ series | Print This Page |
|---|
| TURRET | GTZ-2000 | GTZ-2600 |
|---|---|---|
| Stations | 12 + 12 [ 16 + 16 ( Opt. ) ] | |
| Indexing drive | FANUC AC Servo motor | |
| Indexing speed | 0.2 sec. Adjacnt / 0.5 sec. 180˚ degree ( Single step ) | |
| ACCURACY | Positioning : ± 0.00069° Repeatability : ± 0.00027° | |
| OD tool shank size | □ 25 mm [ □ 20 mm ( Opt. ) ]
( □ 1" [ □ 3/4" ( Opt. ) ] ) |
|
| ID tool shank size | Ø 40 mm [ Ø 32 mm ( Opt. ) ]
( Ø 1-1/2" [ Ø 1-1/4" ( Opt. ) ] ) |
|
| LIVE TOOLING TURRET ( OPT. ) | ||
| Stations / Live tooling stations | 12 + 12 [ 16 + 16 ( Opt. ) ] | |
| Indexing drive | FANUC AC Servo motor | |
| Indexing speed | 0.2 sec. Adjacnt / 0.5 sec. 180˚ degree ( Single step ) | |
| ACCURACY | Positioning : ± 0.00069° Repeatability : ± 0.00027° | |
| Live tooling drive motor | AC 3.7 / 5.5 kW ( 5 / 7.5 HP ) | |
| Live tooling shank size | ER32 ( Ø 20 mm ) [ ER25 ( Ø 16 mm ) Opt. ]
( ER32 ( Ø 3/4" ) [ ER25 ( Ø 1/2" ) Opt. ] ) |
|
| Live tooling RPM range | 6,000 rpm | |
Specifications are subject to change without notice.
Top