| GLS-150 series |
|---|
| SPINDLE | GLS-150 | GLS-200 | |
|---|---|---|---|
| Hole through spindle | Ø 61 mm ( 2.4" ) | Ø 76 mm ( 2.99" ) | |
| Spindle bearing diameter | Ø 90 mm ( 3.54" ) | Ø 110 mm ( 4.33" ) | |
| Hydraulic cylinder | Ø 8" | Ø 10" | |
| Spindle nose | A2-5 | A2-6 | |
| Motor output ( Cont. / 30 min. ) | 11 / 15 kW ( 15 / 20 HP ) | ||
| Motor full output speed | 750 rpm | ||
| Spindle drive system | Direct Belt Drive | ||
| Spindle drive ratio | 1 : 1 ( Opt. 211 : 151 ) | 1 : 1 ( Opt. 211 : 171 ) | |
| Spindle speed range | 60 ~ 6,000 rpm | 45 ~ 4,500 rpm | |
| Spindle full output speed | 750 rpm | ||
| BUILT-IN SPINDLE MOTOR ( OPTIONAL ) | |||
| Spindle motor type | αB112M / 15,000i | --- | |
| Motor output ( Cont. ) | 5.5 kW ( 7.4 HP ) | --- | |
| Motor output ( 30min. / Peak ) | 7.5 kW ( 10 HP ) | --- | |
| Bar capacity | Ø 45 mm ( 1.77" ) | --- | |
| Cs-AXIS SPINDLE ( OPTIONAL ) | |||
| Cs-axis drive motor | Bz-sensor | ||
| Min. spindle indexing angle | 0.001° | ||
| Dynamic accuracy | ± 0.02° | ||
Top
Specifications are subject to change without notice.
*1 Individual models may vary, please see interference drawings.
*2 For M ( Live-tooling turrect ) models only.
*3 Work piece supported by chuck & tailstock.