LG-30 series Gantry Type Machining Center :
| Print this page | LG-4030 | LG-5030 | LG-6030 | LG-8030 | LG-10030 |
|---|---|---|---|---|---|
| CAPACITY | |||||
| X-axis travel | 4,000 mm ( 157.4" ) |
5,000 mm ( 196.8" ) |
6,000 mm ( 236.2" ) |
8,000 mm ( 314.9" ) |
10,000 mm ( 393.7" ) |
| Y-axis travel | 3,000 mm ( 118.1" ) | ||||
| Z-axis travel | 1,000 mm ( 39.3" ) | ||||
| Dist. form spindle nose to table top | 200 ~ 1,200 mm ( 7.8"~ 47.2" ) | ||||
| Dist. between columns ( with water eliminator ) |
3,800 mm ( 149.6" ) ( 3,500 mm ( 137.7" ) ) |
||||
| WORKING TABLE | |||||
| Table size ( X direction ) | 4,000 mm ( 157.4" ) |
5,000 mm ( 196.8" ) |
6,000 mm ( 236.2" ) |
8,000 mm ( 314.9" ) |
10,000 mm ( 393.7" ) |
| Table size ( Y direction ) | 2,800 mm ( 110.2" ) | ||||
| Table load capacity | 2,500 kg/m2 ( 35,550 PSI ) | ||||
| SPINDLE | |||||
| Spindle motor ( cont. / 30 min. ) |
22 / 26 kW ( 30 / 35 HP ) | ||||
| Spindle speed | 4,000 Gear Spindle ( Std. )； 5,000 / 6,000 Gear Spindle ( Opt. )； 6,000 / 8,000 Built-in Spindle ( Opt. ) |
||||
| Spindle taper | CAT50 | ||||
| FEEDRATE | |||||
| X-axis rapid feedrate | 12 m/min. ( 472 IPM ) |
10 m/min. ( 393 IPM ) |
20 m/min. ( 788 IPM ) |
20 m/min. ( 788 IPM ) |
20 m/min. ( 788 IPM ) |
| Y-axis rapid feedrate | 15 m/min. ( 590 IPM ) | ||||
| Z-axis rapid feedrate | 10 m/min. ( 393 IPM ) | ||||
| Cutting feedrate | 10 m/min. ( 393 IPM ) | ||||
| TOOL MAGAZINE | |||||
| Tool magazine capacity | 32 | ||||
| Max. tool diameter / adj. pocket empty |
Ø 127 / 215 mm ( Ø 5.0" / 8.4" ) | ||||
| Max. tool length ( from gauge line ) |
350 mm ( 13.7" ) | ||||
| Max. tool weight | 20 kg ( 44 lb ) | ||||
| ACCURACY | |||||
| Positioning accuracy ( JIS B 6338 ) |
± 0.015 mm / Full Travel ( ± 0.00059" / Full Travel ) |
||||
| Positioning accuracy ( VDI 3441 ) / Full Travel |
P = 0.025 mm ( P = 0.00098" ) |
P = 0.030 mm ( P = 0.00118" ) |
P = 0.035 mm ( P = 0.00137" ) |
P = 0.040 mm ( P = 0.00157" ) |
P = 0.050 mm ( P = 0.00196" ) |
| Positioning accuracy ( VDI 3441 ) Y / Z axes |
P = 0.025 mm / Full Travel ( P = 0.00098" / Full Travel ) |
||||
| Repeatability ( JIS B 6338 ) |
± 0.003 mm ( 0.000118" ) |
||||
| Repeatability ( VDI 3441 ) |
Ps = 0.018 mm ( Ps = 0.00098" ) |
Ps = 0.022 mm ( Ps = 0.00086" ) |
Ps = 0.026 mm ( Ps = 0.00102" ) |
Ps = 0.030 mm ( Ps = 0.00118" ) |
Ps = 0.038 mm ( Ps = 0.00149" ) |
| Repeatability ( VDI 3441 ) Y / Z axes |
Ps = 0.020 mm ( Ps = 0.00078" ) |
||||
| GENERAL | |||||
| Power requirement | 220 ± 10 % | ||||
| Pneumatic pressure requirement | 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI ) | ||||
| Hydraulic unit tank capacity | 120 liter ( 31.5 gal ) | ||||
| Lubrication oil tank capacity | 6 liter ( 1.5 gal ) | ||||
| Coolant tank capacity | 1,100 liter ( 290 gal ) | ||||
Specifications are subject to change without notice.
Top