| GMS Series | Print This Page |
|---|
| SPINDLE | GMS-2000ST | GMS-2600ST |
|---|---|---|
| Bar capacity | Ø 51 mm ( 2" ) | Ø 65 mm ( 2.5" ) |
| Hole through spindle | Ø 61 mm ( 2.4" ) | Ø 76 mm ( 3" ) |
| Spindle bearing diameter ( Front / Rear ) |
Ø 100 / 80 mm ( 3.9" / 3.1" ) | Ø 120 / 100 mm ( 4.7" /3.9" ) |
| Chuck size | Ø 8" | Ø 10" |
| Spindle nose | A2-6 | |
| Spindle motor type | Bi I170S / 6,000 | |
| Spindle motor output ( Cont. / 30 min. ) |
H : 22 / 25 kW ( 29.5 / 33.5 HP ) , L : 11 / 15 kW ( 15 / 20 HP ) | |
| Gear ratio | 1 : 1 | |
| Spindle speed range | 4,800 rpm | 4,000 rpm |
| Spindle motor torque ( Cont. / 30 min. ) |
H : 131 / 149 Nm ( 96.6 / 109.9 ft-lb ) , L : 157 / 223 Nm ( 115.8 / 164.5 ft-lb ) | |
Specifications are subject to change without notice.
Top