| SPINDLE | TS-100 | TS-150 |
|---|---|---|
| Chuck size | 6” or 42 collet chuck | |
| Spindle nose | A2-5 | |
| Hole through spindle | Ø1.61" ( 41mm ) | Ø2.16" ( 55 mm ) |
| Bar capacity | Ø1.25" ( 32 mm ) | Ø1.77" ( 45 mm ) |
| Front / Rear spindle bearing diameter | Ø2.75" / Ø2.36" ( 70mm / 60mm ) | Ø3.14" / Ø2.75" ( 80mm / Ø\70mm ) |
| Spindle speed range | 60 ~ 6,000 RPM | |
| Spindle motor type | FANUC β3 /10,000i / FANUC α3 /10,000i *1 / SJ-PF5.5 *2 | |
| Spindle drive motor | 4.96 / 7.37 HP (3.7 / 5.5 kW ) | |
| Motor output ( cont. / 30min. ) | 6.57 / 9.92 HP ( 4.9 / 7.4 kW ) | |
| Spindle drive system | Direct Belt Drive | |
| Cs-AXIS ( OPT. ) | |
|---|---|
| Cs-axis drive motor | HEIDENHAIN ERM280-120 ( BZ-sensor Ø 82 ) |
| Min. spindle indexing angle | ± 0.001° |
| Dynamic accuracy | ± 0.002° |
Specifications are subject to change without notice *1 For M models only. *2 For MITSUBISHI control
Top