VP-HS Series Bridge Type Machining Center :
| Print this page | VP-1612HS | VP-2012HS | VP-3012HS | VP-4012HS | VP-5012HS |
|---|---|---|---|---|---|
| CAPACITY | |||||
| X-axis travel | 1,600 mm ( 62.9" ) |
2,000 mm ( 78.7" ) |
3,000 mm ( 118.1" ) |
4,000 mm ( 157.4" ) |
5,000 mm ( 196.8" ) |
| Y-axis travel | 1,200 mm ( 47.2" ) | ||||
| Z-axis travel | 760 mm ( 29.9" ) | ||||
| Dist. form spindle nose to table top | 200 ~ 960 mm ( 7.87" ~ 37.7" ) | ||||
| Dist. between columns | 1,300 mm ( 51.1" ) | ||||
| WORKING TABLE | |||||
| Table size ( X direction ) | 1,600 mm ( 62.9" ) |
2,000 mm ( 78.7" ) |
3,000 mm ( 118.1" ) |
4,000 mm ( 157.4" ) |
5,000 mm ( 196.8" ) |
| Table size ( Y direction ) | 1,100 mm ( 43.3" ) | ||||
| Table load capacity | 3,000 kg ( 6,610 lb ) |
3,500 kg ( 7,710 lb ) |
4,500 kg ( 9,920 lb ) |
6,000 kg ( 13,220 lb ) |
8,000 kg ( 17,630 lb ) |
| SPINDLE | |||||
| Spindle taper | BBT50 ( Opt. BBT40 ) | ||||
| Spindle power ( cont. / 30 min. ) | 22 / 26 kW ( 30 / 35 HP ) | ||||
| Spindle speed | Direct-driven spindle 10,000 rpm | ||||
| FEED RATE | |||||
| X-axis rapid feed rate | 24 m/min. ( 944 IPM ) |
20 m/min. ( 787 IPM ) |
10 m/min. ( 393 IPM ) |
8 m/min. ( 314 IPM ) |
|
| Y-axis rapid feed rate | 24 m/min. ( 944 IPM ) | ||||
| Z-axis rapid feed rate | 20 m/min. ( 787 IPM ) | ||||
| Cutting feed rate | 12 m/min. ( 472 IPM ) |
10 m/min. ( 393 IPM ) |
8 m/min. ( 314 IPM ) |
||
| TOOL MAGAZINE | |||||
| Tool magazine capacity | 32 T ( Opt. 24 / 40 T ) | ||||
| Max. tool diameter / adj. pocket empty | Ø 125 / Ø 229 mm ( 4.9" / 9" ) | ||||
| Max. tool length ( from gauge line ) | 350 mm ( 13.7" ) | ||||
| Max. tool weight | 15 kg ( 33 lb ) | ||||
| ACCURACY | |||||
| Positioning accuracy ( JIS B 6338 ) | ± 0.010 mm ( 0.00039" ) / Full Travel | ||||
| Positioning accuracy ( VDI 3441 ) | P ≤ 0.02 mm / Full Travel | P ≤ 0.03 mm ( 0.0011" ) / Full Travel |
P ≤ 0.04 mm ( 0."0015" ) / Full Travel |
||
| Repeatability ( JIS B 6338 ) | ± 0.003 mm ( 0.0011" ) | ||||
| Repeatability ( VDI 3441 ) | Ps ≤ 0.015 mm ( 0.00059" ) | Ps ≤ 0.02 mm ( 0.00078" ) |
Ps ≤ 0.03 mm ( 0.0011" ) |
||
| GENERAL | |||||
| Power requirement | AC 220 ± 10 % 3 , 60 / 50 Hz / 40 kVA | ||||
| Pneumatic pressure requirement ( min. ) | 5 ~ 7 kg / cm² ( 71.1 ~ 99.5 ISP ) | ||||
| Lubrication oil tank capacity | 4.5 liter ( 1.1 gal ) | ||||
| Hydraulic unit tank capacity ( pump ) | 400 liter ( 1 HP ) [ 105.6 gal ( 1 HP ) ] | ||||
| Machine weight | 14,000 kg ( 30,870 lb ) |
16,000 kg ( 35,280 lb ) |
20,000 kg ( 44,100 lb ) |
24,000 kg ( 52,910 lb ) |
28,000 kg ( 61,730 lb ) |
Specifications are subject to change without notice.
Top