HTP Series

X-axis travel : 157.4" ~ 275.5"

Y-axis travel : 98.4" ~ 188.9"

Z-axis travel : 39.3" / 47.2" / 55.1"

Dist. between columns : 106.2" / 137.7" / 169.2"

Table load capacity : 33,070 ~ 44,090 lb

Spindle speed : Gear Spindle 4,000 rpm

Spindle motor : 30 / 35 HP ( Opt. 40 / 50 )
( Cont. / 30 min. )

Spindle taper : BBT50 ( ISO 50 )

X-axis rapids feed rate : 590 / 393 / 295 IPM

Y-axis rapids feed rate : 472 / 393 IPM

Z-axis rapids feed rate : 472 / 393 IPM

Tool magazine capacity : 32 T ( Opt. 40 / 60 / 90 / 120 )