LG-50 series Gantry Type 5-Face Machining Center :
| Print this page | LG-6050 | LG-8050 | LG-10050 | LG-14050 |
|---|---|---|---|---|
| CAPACITY | ||||
| X-axis travel | 6,000 mm ( 236.2" ) |
8,000 mm ( 314.9" ) |
10,000 mm ( 393.7" ) |
14,000 mm ( 551.1" ) |
| Y-axis travel | 5,000 mm ( 196.8" ) | |||
| Z-axis travel | 1,000 mm ( 39.3" ) | |||
| Dist. form spindle nose to table top | 200 ~ 1,200 mm ( 7.8"~ 47.2" ) | |||
| Dist. between columns ( with water eliminator ) |
5,800 mm ( 228.3" ) ( 5,500 mm ( 216.5" ) ) |
|||
| WORKING TABLE | ||||
| Table size ( X direction ) | 6,000 mm ( 236.2" ) |
8,000 mm ( 314.9" ) |
10,000 mm ( 393.7" ) |
14,000 mm ( 551.1" ) |
| Table size ( Y direction ) | 4,800 mm ( 188.9" ) | |||
| Table load capacity | 2,500 kg/m2 ( 35,550 PSI ) | |||
| SPINDLE | ||||
| Spindle motor ( cont. / 30 min. ) |
22 / 26 kW ( 30 / 35 HP ) | |||
| Spindle speed | 4,000 Gear Spindle ( Std. )； 5,000 / 6,000 Gear Spindle ( Opt. )； 6,000 / 8,000 Built-in Spindle ( Opt. ) |
|||
| Spindle taper | CAT50 | |||
| FEEDRATE | ||||
| X-axis rapid feedrate | 20 m/min. ( 788 IPM ) | |||
| Y-axis rapid feedrate | 12 m/min. ( 472 IPM ) | |||
| Z-axis rapid feedrate | 10 m/min. ( 393 IPM ) | |||
| Cutting feedrate | 10 m/min. ( 393 IPM ) | |||
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 32 ( 60 Opt. ) | |||
| Max. tool diameter / adj. pocket empty |
Ø 127 / 215 mm ( Ø 5.0" / 8.4" ) | |||
| Max. tool length ( from gauge line ) |
350 mm ( 13.7" ) | |||
| Max. tool weight | 20 kg ( 44 lb ) | |||
| ACCURACY | ||||
| Positioning accuracy ( JIS B 6338 ) |
± 0.015 mm / Full Travel ( ± 0.00059" / Full Travel ) |
|||
| Positioning accuracy ( VDI 3441 ) / Full Travel |
P = 0.035 mm ( P = 0.00137" ) |
P = 0.040 mm ( P = 0.00157" ) |
P = 0.050 mm ( P = 0.00196" ) |
P = 0.060 mm ( P = 0.00236" ) |
| Positioning accuracy ( VDI 3441 ) Y / Z axes |
P = 0.040 mm / Full Travel ( P = 0.00157" / Full Travel ) |
|||
| Repeatability ( JIS B 6338 ) |
± 0.003 mm ( 0.000118" ) |
|||
| Repeatability ( VDI 3441 ) |
Ps = 0.026 mm ( Ps = 0.00102" ) |
Ps = 0.030 mm ( Ps = 0.00118" ) |
Ps = 0.038 mm ( Ps = 0.00149" ) |
Ps = 0.045 mm ( Ps = 0.00177" ) |
| Repeatability ( VDI 3441 ) Y / Z axes |
Ps = 0.030 mm ( Ps = 0.00118" ) |
|||
| GENERAL | ||||
| Power requirement | 220 ± 10 % | |||
| Pneumatic pressure requirement | 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI ) | |||
| Hydraulic unit tank capacity | 120 liter ( 31.5 gal ) | |||
| Lubrication oil tank capacity | 6 liter ( 1.5 gal ) | |||
| Coolant tank capacity | 1,600 liter ( 422 gal ) | |||
Specifications are subject to change without notice.
Top