HTP Series Super Rigid Bridge Type Machining Center :
Print this page | HTP-4041 | HTP-5041 | HTP-6041 | HTP-7041 |
---|---|---|---|---|
SPECIFICATIONS | ||||
X-axis travel | 4,000 mm ( 157.4" ) | 5,000 mm ( 196.8" ) | 6,000 mm ( 236.2" ) | 7,000 mm ( 275.5" ) |
Y-axis travel | 4,100 mm ( Opt. 4,800 ) [ 161.4" ( Opt. 188.9" ) ] |
|||
Z-axis travel | 1,000 mm ( Opt. 1,200 / 1,400 ) [ 39.3" ( Opt. 47.2" / 55.1" ) ] |
|||
Dist. between columns | 4,300 mm ( 169.2" ) | |||
Dist. from spindle nose to table top | 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 ) [ 7.8" ~ 47.2" ( Opt. 7.8" ~ 55.1" / 7.8" ~ 62.9" )] |
|||
TABLE | ||||
Table size ( X x Y ) | 4,020 x 3,000 mm ( 158.2" x 118.1" ) |
5,020 x 3,000 mm ( 197.6" x 118.1" ) |
6,020 x 3,000 mm ( 237.0" x 118.1" ) |
7,020 x 3,000 mm ( 276.3" x 118.1" ) |
Table load capacity | 15,000 kg ( 33.070 lb ) |
18,000 kg ( 39,680 lb ) |
20,000 kg ( 44,090 lb ) |
20,000 kg ( 44,090 lb ) |
SPINDLE | ||||
Spindle taper | BBT50 ( ISO 50 ) | |||
Spindle motor ( Cont. / 30 min. ) | 22 / 26 kW ( Opt. 30 / 37 ) [ 30 / 35 HP ( Opt. 40 / 50 ) ] |
|||
Spindle speed | Gear Spindle 4,000 rpm | |||
FEED RATE | ||||
X-axis rapids feed rate | 15 m/min. ( 590 IPM ) |
10 m/min. ( 393 IPM ) |
7.5 m/min. ( 295 IPM ) |
|
Y / Z axes rapids feed rate | 10 m/min. ( 393 IPM ) |
|||
Cutting feed rate | 1 ~ 10 m/min. ( 1 ~ 393 IPM ) |
1 ~ 5 m/min. ( 1 ~ 196 IPM ) |
||
TOOL MAGAZINE | ||||
Tool magazine capacity | 32 T ( Opt. 40 / 60 / 90 / 120 ) | |||
Max. tool length | 350 mm ( Opt. 400 ) [ 13.7" ( Opt. 15.7" ) ] | |||
Max. tool weight | 20 kg ( 44 lb ) | |||
Max. tool diameter / adj. pocket empty | Ø 127 / Ø 215 mm ( Ø 5" / Ø 8.4" ) | |||
ACCURACY | ||||
Positioning accuracy ( JIS B 6338 ) | ± 0.015 mm ( 0.00059" ) / Full Travel | |||
Positioning accuracy ( VDI 3441 ) | P ≤ 0.030 mm ( 0.0011" ) / Full Travel |
P ≤ 0.040 mm ( 0.0015" ) / Full Travel |
P ≤ 0.050 mm ( 0.0019" ) / Full Travel |
P ≤ 0.040 mm ( 0.0015" ) / Full Travel |
Repeatability ( JIS B 6338 ) | ± 0.003 mm ( ± 0.00011" ) | |||
Repeatability ( VDI 3441 ) | Ps ≤ 0.025 mm ( 0.00098" ) |
Ps ≤ 0.030 mm ( 0.0011" ) |
Ps ≤ 0.035 mm ( 0.0016" ) |
Ps ≤ 0.030 mm ( 0.0011" ) |
GENERAL | ||||
Coolant tank capacity | 1,000 liter ( 264 gal ) | |||
Lubrication oil tank capacity | 6 liter ( 1.5 gal ) | |||
Hydraulic tank capacity | 100 liter ( 26.4 gal ) | |||
Pneumatic pressure requirement | 5 ~ 8 kg / cm² ( 71.1 ~ 113.7 ISP ) | |||
Power requirment | AC 220 ± 10 % Vac | |||
Machine weight | 45,000 kg ( 99,210 lb ) |
49,000 kg ( 108,230 lb ) |
53,000 kg ( 116,850 lb ) |
64,000 kg ( 141,100 lb ) |
Specifications are subject to change without notice.