HTP Series Super Rigid Bridge Type Machining Center :
Print this page | HTP-4025 | HTP-5025 | HTP-6025 |
---|---|---|---|
SPECIFICATIONS | |||
X-axis travel | 4,000 mm ( 157.4" ) | 5,000 mm ( 196.8" ) | 6,000 mm ( 236.2" ) |
Y-axis travel | 2,500 mm ( Opt. 3,200 ) [ 98.4" ( Opt. 125.9" ) ] |
||
Z-axis travel | 1,000 mm ( Opt. 1,200 / 1,400 ) [ 39.3" ( Opt. 47.2" / 55.1" ) ] |
||
Dist. between columns | 2,700 mm ( 106.2" ) | ||
Dist. from spindle nose to table top | 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 ) [ 7.8" ~ 47.2" ( Opt. 7.8" ~ 55.1" / 7.8" ~ 62.9" )] |
||
TABLE | |||
Table size ( X x Y ) | 4,020 x 2,400 mm ( 158.2" x 94.4" ) |
5,020 x 2,400 mm ( 197.6" x 94.4" ) |
6,020 x 2,400 mm ( 237.0" x 94.4" ) |
Table load capacity | 15,000 kg ( 33.070 lb ) | 18,000 kg ( 39,680 lb ) | 20,000 kg ( 44,090 lb ) |
SPINDLE | |||
Spindle taper | BBT50 ( ISO 50 ) | ||
Spindle motor ( Cont. / 30 min. ) | 22 / 26 ( Opt. 30 / 37 ) kW [ 30 / 35 HP ( Opt. 40 / 50 ) ] |
||
Spindle speed | Gear Spindle 4,000 rpm | ||
FEED RATE | |||
X-axis rapids feed rate | 15 m/min. ( 590 IPM ) | 10 m/min. ( 393 IPM ) | |
Y / Z axes rapids feed rate | 12 m/min. ( 472 IPM ) | ||
Cutting feed rate | 1 ~ 10 m/min. ( 1 ~ 393 IPM ) | 1 ~ 5 m/min. ( 1 ~ 196 IPM ) | |
TOOL MAGAZINE | |||
Tool magazine capacity | 32 T ( Opt. 40 / 60 / 90 / 120 ) | ||
Max. tool length | 350 mm ( Opt. 400 ) [ 13.7" ( Opt. 15.7" ) ] | ||
Max. tool weight | 20 kg ( 44 lb ) | ||
Max. tool diameter / adj. pocket empty | Ø 127 / Ø 215 mm ( Ø 5" / Ø 8.4" ) | ||
ACCURACY | |||
Positioning accuracy ( JIS B 6338 ) | ± 0.015 mm ( 0.00059" ) / Full Travel |
||
Positioning accuracy ( VDI 3441 ) | P ≤ 0.030 mm ( 0.0011" ) / Full Travel |
P ≤ 0.040 mm ( 0.0015" ) / Full Travel |
P ≤ 0.050 mm ( 0.0019" ) / Full Travel |
Repeatability ( JIS B 6338 ) | ± 0.003 mm ( 0.00011" ) | ||
Repeatability ( VDI 3441 ) | Ps ≤ 0.025 mm ( 0.00098" ) | Ps ≤ 0.030 mm ( 0.0011" ) | Ps ≤ 0.035 mm ( 0.0016" ) |
GENERAL | |||
Coolant tank capacity | 1,000 liter ( 264 gal ) | ||
Lubrication oil tank capacity | 6 liter ( 1.5 gal ) | ||
Hydraulic tank capacity | 100 liter ( 26.4 gal ) | ||
Pneumatic pressure requirement | 5 ~ 8 kg / cm² ( 71.1 ~ 113.7 ISP ) | ||
Power requirment | AC 220 ± 10 % Vac | ||
Machine weight | 41,000 kg ( 90,390 lb ) | 45,000 kg ( 99,210 lb ) | 49,000 kg ( 108,030 lb ) |
Specifications are subject to change without notice.